เทอร์โมมิเตอร์

HI 98502

Checktemp® °F Electronic Digital Thermometer

±0.3°C accuracy
CAL CHECK®
Ideal for spot checks
Fast and accurate results

If you ever wished that your temperature measurements could be made a little easier, the Checktemp® might just be what you’re looking for! The Checktemp® offers high accuracy over a wider range without worrying about breakage or condensation.

The Checktemp® offers NO breakage, NO waste, NO injuries, NO difficulty in reading; not even a parallax error by taking a wrong measurement due to the angle of view!

Checktemp® is provided with HANNA’s unique CAL CHECK™ function for accurate measurements every time: simply activate a switch and the instrument will simulate an ice bath of 0.0°C (32.0°F) signal that is displayed on the LCD within a range of ±0.3°C (±0.5°F).

The sharp-tip probe of the Checktemp® easily penetrates semisolid products, making routine controls simple and quick for both incoming and outgoing goods. Checktemp® is the ideal instrument for measuring temperature according to HACCP requirements.

Models with factory calibration certificate against NIST standards are also available.

 Order Information:
HI 98502 (Checktemp®C) is supplied with penetration probe, protective cap, battery and instructions.
For model with Factory Calibration Certificate, order HI 98504

Specifications

Range   -58.0 to 302.0°F
Resolution   0.1°F (58.0 to 199.9°F);
1°F (200 to 302°F)
Accuracy   ±0.5°F (-4 to 194°F)
±1°F (outside)
Probe   fixed, stainless steel
105 x dia 3 mm (penetration)
Battery Type / Life   1.5V / approximately 3000 hours of continuous use
Environment   0 to 50°C (32 to 122°F); RH max 95%
Dimensions   66 x 50 x 25 mm (2.6 x 2.0 x 1.0″) – meter only
Weight   50 g (1.8 oz.) – meter only