Checktemp® C Electronic Digital Thermometer
Ideal for spot checks
Fast and accurate results
If you ever wished that your temperature measurements could be made a little easier, the Checktemp® might just be what you’re looking for! The Checktemp® offers high accuracy over a wider range without worrying about breakage or condensation.
The Checktemp® offers NO breakage, NO waste, NO injuries, NO difficulty in reading; not even a parallax error by taking a wrong measurement due to the angle of view!
Checktemp® is provided with HANNA’s unique CAL CHECK™ function for accurate measurements every time: simply activate a switch and the instrument will simulate an ice bath of 0.0°C (32.0°F) signal that is displayed on the LCD within a range of ±0.3°C (±0.5°F).
The sharp-tip probe of the Checktemp® easily penetrates semisolid products, making routine controls simple and quick for both incoming and outgoing goods. Checktemp® is the ideal instrument for measuring temperature according to HACCP requirements.
Models with factory calibration certificate against NIST standards are also available.
HI 98501 (Checktemp®C) is supplied with penetration probe, protective cap, battery and instructions.
For model with Factory Calibration Certificate, order HI 98503
Range -50.0 to 150.0°C
Accuracy ±0.3°C (-20 to 90°C)
Probe fixed stainless steel
105 x dia 3 mm (4.1 x dia 0.1″) (penetration)
Battery Type / Life 1.5V / approximately 3000 hours of continuous use
Environment 0 to 50°C (32 to 122°F); RH max 95%
Dimensions 66 x 50 x 25 mm (2.6 x 2.0 x 1.0″) – meter only
Weight 50 g (1.8 oz.) – meter only