เทอร์โมมิเตอร์

HI 143

T-Logger with Locking Wall Cradle

Logging start through PC by pressing a button or at a set time
Selectable sampling interval from 1 minute to 24 hours
Up to 4,000 logged samples
Selectable measurement unit, °C or °F
Min/Max measured values are stored and displayed
Programmable high and low alarms
Non-volatile storage of logging parameters and data
Battery level indicator on display
Security password
Waterproof protection

HI 143 is a temperature data logger with internal NTC sensor. The HI 143 is controlled via USB or RS232 on a PC with HANNA’s Windows® compatible application software. Communication is made between the logger and the PC through the HI 143001 transmitter with RS232 or HI 143002 with USB connector. The supplied wall cradle makes it easy to lock the meter in place to prevent tampering and the application software supports security passwords.

Order Information:
HI 143 is supplied with CR2032 lithium battery, wall cradle, lock and instructions.
HI 143-00 is supplied with HI 143001 RS232 communication cradle, Windows® compatible application software, CR2032 lithium battery, wall cradle, lock and instructions. HI 143-10 is supplied with HI 143002 USB communication cradle, Windows® compatible application software, CR2032 lithium battery, wall cradle, lock and instructions.

Specifications

Range   -30.0 to 70.0ºC / -22.0 to 158.0ºF
Resolution   0.1°C / 0.1°F
Accuracy   ±0.4°C (-20 to 60°C); ±0.6°C (outside)
±0.7°F (-4 to 140°F); ±1.1°F (outside)
Typical EMC Dev.   ±0.3°C / ±0.5°F
Calibration   Factory calibrated
Data Logging   Up to 4000 samples
Logging Interval   User selectable, from 1 minute to 24 hours
Battery Type   1 x CR2032 3V lithium battery
Battery Life   2 years
Protection   IP 65 (watertight)
Dimensions   60 x 37 x 17 mm (2.4 x 1.5 x 0.7’’)

Accessories

Accessories
HI 143002 USB Communication Cradle for HI 143
HI 143001 RS232 Communication Cradle for HI 143
HI 92143 Windows® Compatible Software for HI 143 Series