Main Menu
สถิติเยี่ยมชม
  • หน้าแรก>>Products>>Spectrophotometers and Photometers>>Advanced single Parameter Photometers>>เครื่องโฟโตมิเตอร์-ซิลิกา (Silica High Range ISM Photometer 0- 200 mg/L)
  • header_20101002142533.jpg

    เครื่องโฟโตมิเตอร์-ซิลิกา (Silica High Range ISM Photometer 0- 200 mg/L)

    HI 96770

    Silica High Range ISM

              The HI 96770 is an auto diagnostic portable microprocessor meter that benefits from HANNA’s years of experience as a manufacturer of analytical instruments. It has the advanced optical system based on a Light Emitting Diode (LED) and a narrow band interference filter that allows most accurate and repeatable readings. All instruments are factory calibrated and the electronic and optical design minimizes the need of frequent calibration.

    With the powerful CAL CHECK™ validation function, you are able to validate good performance of your instrument at any time. The validation procedure is extremely user friendly. Just use the exclusive HANNA ready-made, NIST traceable standards to verify the performance of the instrument and recalibrate if necessary.

    The instrument is splash waterproof and the LED and filter units are protected from dust or dirt by a transparent cup. This makes the instruments fulfill field applications. Display messages aid the user in routine operation. The meter has an auto-shut off feature that will turn off the instrument after 10 minutes of non use in measurement mode or after 1 hour if left in calibration mode.

    The meter uses an exclusive positive-locking system to ensure that the cuvet is in the same position every time it is placed into the measurement cell. It is designed to fit a cuvet with a larger neck making it easier to add both sample and reagents. The cuvet is made from special optical glass to obtain best results.

    The HI 96770 meter measures the molybdate reactive silica (SiO2) content in water samples in the 0 to 200 mg/L (ppm) range. The method is an adaptation of the USEPA METHOD 370.1 for drinking, surface and saline waters, domestic and industrial wastes and Standard Method 4500-SiO2 C.

    The reagents are in powder form and are supplied in packets. The amount of reagent is precisely dosed to ensure the maximum repeatability.

    Order Information:

    HI 96770 Ion Selective Meter is supplied with:
    • Two Sample Cuvets and Caps
    • 9V Battery
    • Instruction Manual

    Specifications

    Range   0 to 200 mg/L
    Resolution   1 mg/L
    Accuracy   ±5 mg/L @ 100 mg/L
    Typical EMC Deviation   ±1 mg/L
    Light Source   Light Emitting Diode
    Light Detection   Silicon Photocell with narrow band interference filter @ 466 nm.
    Method   Adaptation of the USEPA METHOD 370.1 for to drinking, surface and saline waters, domestic and industrial wastes and Standard Method 4500-SiO2 C. The reaction between silica and the reagents causes a yellow tint in the sample.
    Environment   0 to 50°C (32 to 122°F); max 95% RH non-condensing
    Battery Type   1 x 9 volt
    Auto Shut-off   After 10′ of non-use in measurement mode; after 1 hour of non-use in calibration mode; with last reading reminder.
    Dimensions   192 x 102 x 67 mm (7.6 x 4 x 2.6″)
    Weight   290 g (10 oz.)

     

    ไฟล์ที่เกี่ยวข้องกับผลิตภัณฑ์
  • Requesting a Quotation and Ordering Products

    131 Thailand Science Park. Innovation Cluster 1 Building,

    Klong 1, Klong Luang, Pathumthani 12120 Thailand. 

    Tel.  02-191-3928 Fax 02-191-3929


    For more information please contact 081-847-6768 (Ms. Nareerat) IDLine: @alltestkit

    E-mail : info@highents.com

     

    >>Online Quotation Click here<<