|
Product Features
Combining two of the most popular electrochemistry parameters, the Eutech’s CyberScan PC650 allows you to measure pH, conductivity and temperature with one handheld, at the same time.
| :: |
Simultaneously measures and displays three parameters |
| |
|
| :: |
±1% full scale accuracy at 3-decimal resolution across a wide measurement range |
| |
|
| :: |
Ion-measurement capabilities with 3-digit resolution |
| |
|
| :: |
Accepts two-cell and four-cell conductivity probe to measure up to 500 m/s — meter measures pure water! |
| |
|
| :: |
Selectable multi-point calibration for more accurate conductivity measurements or single-point calibration for quick, convenient calibration with no mistakes |
| |
|
| :: |
One-Glance-Tells-All Screen Display with Backlight
Electrode status report, calibration data and simultaneous display of up to 4 parameters |
| |
|
| :: |
Rugged and IP67-rated waterproof for applications in harsh environments. Meter floats on water! |
| |
|
| :: |
Easy-to-understand prompt messages for easy set-up, calibration and trouble-shooting |
| |
|
| :: |
Recorded readings individually stamped with time and date in GLP compliant format |
| |
|
| :: |
Auto-logging meter saves readings automatically within seconds to prevent data loss |
| |
|
| :: |
HI-LO limit alarm for easy quality control – Meter alerts when readings fall outside selected ranges |
| |
|
| :: |
Wireless Information Technology: No wires, no cables—Transfer data from meter to computer with the press of a button |
| |
|
| :: |
Non-Volatile Memory protects information and meter settings, even when batteries run out |
| |
|
| :: |
Four Levels of Password Protection prevents tampering or accidental data deletion |
| |
|
| :: |
Calibration Alarm: No more out-dated calibration settings |
Applications
Environmental: Test water quality, monitor health of aquatic ecosystems, survey surface and ground water drinking supplies, and meet EPA regulations.
Water Quality Testing: For analyzing water hard water, untreated water, drinking water, effluent water, pool water and incoming process water. Ideal for all types of quality assurance and water quality testing.
Industrial: For checking metal finishing, cooling tower water, printing fountain solutions, boiler water, brines, rinse tanks, ponds, pollution control, recirculating systems, waste water and industrial process systems. Useful for food analysis and quality assurance testing.
Aquaculture: Use to monitor oxygen levels in catfish and shrimp farming; game stocking ponds; ornamental fish tanks and ponds; and other fish farming applications.
Specifications
|
pH Range
|
-2.000 to 20.000 pH |
| Resolution & Accuracy |
0.1/0.01/0.001 pH & ±0.002 pH |
| No. of pH Calibration Points |
1 (Offset) to 6 points |
| pH Buffer Options |
USA, NIST, DIN, PWB, Custom |
| mV Range |
±2000.0 mV |
| Resolution & Accuracy |
0.1 mV & ±0.2 mV |
| Ion Concentration Range |
0.001 to 19900 |
| Resolution & Accuracy |
2 or 3 digits & ±0.5% FS (mono); 1% FS (div) |
|
No. of Ion Calibration Pts
|
Up to 8
|
|
Conductivity Range
|
.. to 500 mS/cm |
| Resolution & Accuracy |
0.05% FS & ±1% FS + 1 LSD |
| Cell Constant |
0.010 to 10.000 |
|
Temperature Coefficient
|
Linear & Pure
|
| TDS Range |
.. to 500.0 ppt |
| Resolution & Accuracy |
0.05% FS & ±1% FS +1 LSD |
| Salinity Range |
0 to 80 ppt |
| Resolution & Accuracy |
0.05% FS & ±1% FS +1 LSD |
| Temperature Range |
-10.0 to 110.0 °C / 14.0 to 230.0 °F (Meter) |
| Resolution & Accuracy |
0.1 °C/°F & ±0.5°C/ ±0.9°F |
| Temperature Compensation |
Automatic / Manual (0 to 100 °C) |
| Memory |
500 Data Sets with Date/Time stamping &
Security password protection |
| Output |
IrDA Wireless Communications |
|
Display
|
Multi-data Back-lit dot matrix; 7.2 cm (H) X 5.4 cm (W)
|
| Special Functions |
Auto-Calibration; Data-logging options with time/date indexed, GLP compliance; Simultaneous Display and measurement of 4 parameters; Cal-due alarm; pH slope/offset Display & Self-diagnostic |
| Power |
4 X 1.5 V “AA” Alkaline batteries or 9 V DC adapter, 500 mA |
|
