Main Menu
  • หน้าแรก>>Products>>Tube Test Meter>>TubeTest (NANOCOLOR® Heating blocks)>>อุปกรณ์วัด Tube Test (Heating block NANOCOLOR® VARIO C2)
  • header_20130404151328.png

    อุปกรณ์วัด Tube Test (Heating block NANOCOLOR® VARIO C2)

    Heating block NANOCOLOR® VARIO C2
    Heating block of the future
    Be safe
    919300_Heizkurve Constant digestion conditions
     •  High temperature stability
    •  Electronic overheating protection
    •  Graphic display of heating curves
    919300_Schutzplatte Maximum safety for the user
     •  Extra strong safety covers as contact
    protection (10 mm, replaceable)
    on the heating block surface
    •  Lockable protective lids
    •  Display alert in case of open protective lid
    Meet specifications
    Internal quality control according to ISO 9001
     •  In conformance with requirements of internal quality control (IQC)
    •  Comply with demands of supervisors and authorities
    •  Heating curves to check temperature stability
    •  Electronic temperature control and fully automatic calibration with the
    NANOCOLOR® T-Set (REF 919 917)
     •  Comfortable data transfer via USB or serial interface RS 232
    •  Easy generation of quality certificates in accordance to GLP with the
    NANOCOLOR® T-Set software
    919300_T-Set_Kal NANOCOLOR® T-Set
    Automatic temperature control and calibration of the heating blocks
     •  Connect the RS 232 plug of the T-Set to the heating block
    •  Place the temperature sensor into the small bore located on the safety cover
    919350_DisplayMenue 919350_DisplayProgA 919350_DisplayProgS
    Select „T-Set“ in the menu Select the respective program Start the program
    Universal thermometer for external temperature measurements
     •  Connect the RS 232 plug of the T-Set to the heating block
    •  Dip the temperature sensor into the respective sample solution
    •  The temperature is displayed in the heating block’s display
    919350_DisplayTSet2 919350_DisplayTSet
    Save time
    Intuitive operation
     •  Convenient input via icons
    •  Quick and easy selection of heating programs
    919300_displaystart 919300_displaytemp 919300_displayzeit 919300_displayprostart
    Start screen   Temperature selection   Time selection     Program start
    919300_ZeitSparen Time-saving procedures
     •  Extremely short warm-up times (from 20 to 160 °C in just 10 minutes)
    •  High-speed COD, total-Nitrogen, total-Phosphorous and
    total-Metals in just 30 minutes
    919350_DisplayMenue (1) Self-explanatory user guidance
     •  User-friendly, bright touch screen
    •  Operation without time-consuming training
    Experience flexibility
    919300_wH_mD The ideal size for any purpose
    NANOCOLOR® VARIO C2: Simultaneous digestion of up to 12 samples
    919300_Prog Standard programs and easy programming
     •  5 pre-programmed temperatures 70 / 100 / 120 / 148 / 160 °C
    •  4 pre-programmed heating times 30 min / 60 min / 120 min / cont.
    •  7 free memory locations between 40 -160 °C (1 °C increments)
    •  8 free memory locations between 0h:01min – 9h:59min (1min increments)
    Suitable for all NANOCOLOR® digestion methods
    Application Temperature Time
    COD (DIN ISO 15705) 148 °C 120 min
    High-speed COD 160 °C 30 min
    TOC 120 °C 120 min
    total-Nitrogen 120 °C 30 min
    total-Phosphorous 120 °C 30 min
    Organic acids 100 °C 10 min
    total-Metals (Cadmium, Chromate, Iron, Cobalt, Copper, Nickel, Zinc) 120 °C 30 min
    AOX 120 °C 30 min
    Hydrocarbons 148 °C 120 min
    Programmable, user-defined programs 40 – 160 °C 0h:01min – 9h:59min
    Technical Data
    Instrument: NANOCOLOR® VARIO C2
    Type: Programmable heating blocks for chemical-analytical digestions with 12 holes / for test tubes with 16 mm OD (outer diameter) / integrated protective lids
    Display: Coloured, backlit LCD touch screen
    Operation: Display menu guidance via touch screen
    Temperatures: 5 pre-programmed temperatures: 70 / 100 / 120 / 148 / 160 °C
    7 free memory locations for individual temperature settings
    Temperature range: 40 – 160 °C (1 °C increments)
    Temperature stability: ± 1 °C (according to DIN, EN, ISO and EPA methods)
    Warm-up time: from 20 °C to 160 °C within 10 minutes
    Heating times: 4 pre-programmed heating times: 30 min / 60 min / 120 min / cont.
    8 free memory locations for individual heating times
    Time range: 0h:01min – 9h:59min (increments 0h:01min)
    Safety: Replaceable safety covers as contact protection
    Lockable protective lids
    Overheating protection
    Interfaces: Bidirectional serial RS 232, USB A (master) and USB B (slave)
    Analytical quality control: With NANOCOLOR® T-Set (REF 919 917)
    optional fully automatic calibration and preparation of test certificates for instrument control and monitoring according to ISO 9001)
    Update: Via internet and USB stick
    Power supply: 110 – 230 V~, 50/60 Hz
    Power consumption: 125/250 VA
    Dimensions (B x T x H): 169 x 282 x 146 mm
    Weight: approx. 2.0 kg
    Marking: CE
    Warranty: 2 years
    These instruments conform to the following directives:
    – 2006/95/EC – Low-Voltage Directive
    – 2004/108/EC – EMV Directive
    Ordering information
    Heating block incl. protective lids, power line cord, USB cable, software-DVD, certificate and manual
    REF 919 350
    Electronic temperature sensor incl. software-DVD, certificate and manual
    REF 919 917
  • Requesting a Quotation and Ordering Products

    131 Thailand Science Park. Innovation Cluster 1 Building,

    Klong 1, Klong Luang, Pathumthani 12120 Thailand. 

    Tel.  02-191-3928 Fax 02-191-3929

    For more information please contact 081-847-6768 (Ms. Nareerat) IDLine: @alltestkit

    E-mail :


    >>Online Quotation Click here<<