Main Menu
  • หน้าแรก>>Products>>Tube Test Meter>>TubeTest (NANOCOLOR® Photometer)>>อุปกรณ์วัด Tube Test (Digitalphotometer NANOCOLOR® 500 D)
  • header_20130408194545.gif

    อุปกรณ์วัด Tube Test (Digitalphotometer NANOCOLOR® 500 D)

    Digitalphotometer NANOCOLOR® 500 D
    Mircoprocessor controled filter photometer

    The digital photometer NANOCOLOR® 500 D is the consequent development of our very successful photometer NANOCOLOR® 400 D. Adapted to our customers’ requirements, today and tomorrow, it is suitable for universal use in water and wastewater analysis. This includes municipal and industrial wastewater, drinking water, surface water, ground water as well as cooling and boiler water.

    Save time and make your lab time easier
    919500-vl-B1 Fast measurements by NANOCOLOR® barcode technology

    • Fully automatic, instant cuvette detection by the built-in laser scanner allows simple and fast routine analysis
    • Selection of the test method and suitable wavelength, the actual measurement and storage of the measurement results are carried out automatically without having to use any other key

    Measurement without cuvette slot cover

    • The modern designed optics is insensitive to external light and allows straightforward measurements

    Everything at a glance

    • The modern, illuminated graphic display with user guidance shows all the important data at a glance.

    Pre-programmed tests and photometric basic functions

    • More than 100 pre-programmed tests with over 200 analysis programmes
    • Straightforward call-up of all photometric basic functions, such as absorbance, factor, standard, transmission and kinetics
    Experience precision and increase accuracy
    Self-explanatory user guidance

    • All tests and menu items can be activated fast and easily. The photometer can be operated without any complex and time-consuming training

    Manual with test instructions, presented as pictograms

    • Safe test procedures without complex instructions

    Highly accurate measurements by high-quality optical components

    • The high-precision optic warrented accurate results
    Assure results and meet specifications
    IQC according to ISO 9001 with NANOCONTROL NANOCHECK

    • Conformance to requirements of internal quality control (IQC) and protection towards supervisors and authorities
    • Fast and easy control of photometric accuracy of theNANOCOLOR® 500 D with NANOCONTROL NANOCHECK
      (Cat. No. 925 701) by the user himself

    Documentation of results in accordance to GLP

    • Individual entries of sample number, sample location, user and dilution

    Clear memory management

    • GLP-conform storage of the measured results with all supplementary information such as date, time, sample number, sample location, user and dilution
    • Fast and easy access to stored results and data sets

    Convenient export of data

    • Easy transfer of measured results and spectra to various common PC formats (e.g. MS Excel)
    • Direct print-out of measured data with the NANOCOLOR® thermal printer (Cat. No. 919 16)
    Enjoy flexibility and be prepared for the future
    No cuvette adapter required

    • Round tubes (16 mm OD) and rectangular cuvettes (10, 20, 50 mm) can be used in the universal cuvette slot without any adapter
    • Small accessories are not required

    Programmable for user defined applications 

    • Free programming of up to 100 user defined methods

    Fast photometer update – free of charge

    • At any time, stay up-to-date by easy programme updating via Internet/PC

    In the field and in the lab
    The standard built-in, robust high-performance battery with charge regulator allows continuous operation at 220V (110V) and up to 3000 on-site mains-independent measurements. The battery charge status is shown in the graphic display. In the power saving mode, the photometer switches off automatically after 10, 20… 120 min.

    Technical data
    Type: Filter photometer with microprocessor control, self-test and auto-calibration
    Light sources: Tungsten lamp
    Optical system: Automatic filter wheel with 10 interference filters
    Wavelength: 345 / 365 / 436 / 470 / 520 / 540 / 585 / 620 / 690 / 800 nm
    plus 2 compartments for additional filters
    Wavelength accuracy: ± 2 nm
    Wavelength calibration: Automatic
    Wavelength selection: Automatic, barcode
    Spectral bandwidth: 10 – 12 nm
    Photometric range: ± 3.0 E
    Measuring modes: More than 100 pre-programmed tests, 100 optionally programmable methods, absorbance, transmission, factor, kinetics
    Cuvette holder: round tubes 14 mm ID, rectangular cuvettes 10, 20, 50 mm
    Data memory: 500 measured data sets, GLP conform
    Display: graphic display, backlight, 64 x 128 pixels
    Operation: bar code technology, display user guidance, foil-covered push-buttons
    External light: Insensitive, open cuvette slot
    Interfaces: USB 1.1 and bidirectional serial RS 232
    Update: Via Internet / PC
    Operating range: 10-50 °C , max. 90% relative humidity (without condensation)
    Power supply: 100 – 240V~, 50/60 Hz / 6V, 3.2 Ah via built-in battery with charge regulator and mains power supply
    DimensionsL / B / H: 227 x 282 x 105 mm
    Weight: 2,4 kg
    Warranty: 2 years
    This appliance comply with the following EC directives:
    – 73/23/EEC of 19.02.1973 – Low-Voltage Directive
    – 89/336/EEC of 03.05.89 (including amendment directive 92/31/EEC) – EMC Directive
    Ordering information
    Universal photometer NANOCOLOR® 500 D incl. software CD, manual, dust cover, mains power supply, USB cable, data cable and calibration cuvette in stable transport bag Cat.No. 919 500

  • Requesting a Quotation and Ordering Products

    131 Thailand Science Park. Innovation Cluster 1 Building,

    Klong 1, Klong Luang, Pathumthani 12120 Thailand. 

    Tel.  02-191-3928 Fax 02-191-3929

    For more information please contact 081-847-6768 (Ms. Nareerat) IDLine: @alltestkit

    E-mail :


    >>Online Quotation Click here<<