อุปกรณ์วัด pH (pH indicator Ready ® with alarm light for water treatment)
pH indicator Ready ® with alarm light for water treatment
HI 981402 is a robust pH meter made for the continuous monitoring, equipped with liquid crystal display. It is supplied with HI 1286 electrode with plastic body, double junction and gel electrolyte.
This special electrode with PTFE diaphragm, it is very resistant to clogging and thus suitable for industrial control of the waters. It replaces it with ease thanks to the BNC connector which is always protected by a rubber sheath.
HI 981402 is equipped with a red alarm LED that lights up if the threshold set by the user (selectable from 3 to 11 pH) is exceeded by a value greater than about 0.5 pH (hysteresis).
calibration is performed manually at 1 or 2 points by means of the front trimmers. With the body being protected from splashes, HI 981402 is suitable for installation in harsh environments with high humidity or dust. The practical hook allows you to secure the instrument directly to the desired point. The 12 Vdc power supplied allows continuous control without interruption.
Specifications HI 981402
Scala 0.0 to 14.0 pH
Resolution PH 0.1
Accuracy ± 0.2 pH
Calibration manual to 2 points, a pH 4:07
Set point adjustable from 3.0 to 11.0 pH
Alarm Red LED (flashes when the pH is higher or lower than its set point by more than 0.5 pH)
PH electrode HI 1286, with plastic body, double junction, PTFE diaphragm, 2 m BNC cable (included)
Input Impedance 10 12 Ohm
Supply external 12 Vdc adapter (included)
Dimensions and weight 86 x 110 x 43 mm / 150 g
Accessories HI 981402
HI 1286 PH electrode for HI 981401N and HI 981402, with double junction, gel-filled, maximum pressure 3 bar, BNC connector, 2 m cable
HI 70004P Solution pH 4, 25 sachets of 20 ml
HI 70007P Solution pH 7.01, 25 sachets of 20 ml
HI 7004L Solution pH 4.01, 500 mL
HI 7007L Solution pH 7.01, 500 mL
HI 7061L Electrode cleaning solution, general use, 500 mL
HI 710006 12 Vac adapter Vdc/230