Main Menu
  • หน้าแรก>>Products>>Mini Controller>>Mini Panel Mounted Controller>>อุปกรณ์วัด Mini Controller (Resistivity Mini Controller)
  • header_20130408233028.jpg

    อุปกรณ์วัด Mini Controller (Resistivity Mini Controller)

    BL 983314

    Resistivity Mini Controller

    • Easy to handle
    • Fire retardant casing
    • Selectable overdose protection system
    • Splash resistant cover


    BL 983314 is a simple to operate resistivity controller designed for ultra pure water, reverse osmosis, and water conditioning applications. The BL 983314 resistivity controller is also ideal for continuous monitoring of process solutions. Set point and calibration are manually adjusted with a trimmer and the alarm relay allows for simple control.

    Readings are automatically temperature compensated, with three different coefficients (β=2.4, 3.5 or 4.5 %/°C). The alarm contact can be used for connection to an alarm, pump, solenoid or dosing system.

    The relay contact is open when readings are higher than the set point, while for measurements lower than set point, the relay contact is closed. The Hysteresis is typically 0.20 MW/cm from the set point.

    Measurements are displayed on the LCD and the multicolored LED continuously indicates if the controller is in measurement, dosing or alarm mode. Users can choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits operators to enable or disable the dosing relay according to need.

    The overtime control system advises users when the relay is active for too long, helping to prevent over-dosage.

    Order Information:
    BL 983314-0 (12 VDC) and BL 983314-1 ( 115/230V) are supplied with mounting brackets, transparent cover and instruction manual.




    Range   0.00 to 19.90 MΩ/cm
    Resolution   0.10 MΩ/cm
    Accuracy @ 25°C   ±2% F.S.
    Probe   HI 3314 resistivity probe with 2 m (6.6’) cable (included)
    Temperature Compensation   Automatic and linear, 5 to 50°C (41 to 122°F)
    Temperature Coefficient   ß=2.4; 3.5; 4.5%/°C
    selectable through jumper on the rear panel
    Calibration   factory calibrated
    Dosing Relay   maximum 2A (fuse protected), 250 Vac, 30 Vdc contact close when measure < set point
    Setpoint   adjustable from 0 to 19.90 MΩ/cm
    Overtime   adjustable, typically from 5 to approx. 30 minutes
    Power Supply   See Chart
    Dimensions   79 x 49 x 95 mm (3.1 x 1.9 x 3.7’’)
    Weight   See Chart
  • Requesting a Quotation and Ordering Products

    131 Thailand Science Park. Innovation Cluster 1 Building,

    Klong 1, Klong Luang, Pathumthani 12120 Thailand. 

    Tel.  02-191-3928 Fax 02-191-3929

    For more information please contact 081-847-6768 (Ms. Nareerat) IDLine: @alltestkit

    E-mail :


    >>Online Quotation Click here<<