อุปกรณ์วัด Conductivity/TDS (TDS Tester with 1 mg/L EC resolution & 0.1 °C resolution)
with 1 mg/L EC resolution & 0.1 °C resolution
- Direct probe connection
- Automatic calibration
- Automatic Temperature Compensation
The Primo series of testers provide a fast and dependable way to measure the total dissolved solids or conductivity in your water samples. It is ideally suited for the rigorous demands of water quality professionals. Many professionals use the cabled version of the Primo when demonstrating the before and after results of conditioning and filtration systems.
Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature.
Operating and routine maintenance has never been easier. Primo uses a single button for each parameter at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and Primo automatically enters calibration mode. Simply open a sachet of calibration solution, dip the probe in, and within seconds the meter recognizes the calibration solution and calibrates itself!
Primo 2 with direct probe connection is supplied with batteries and instructions. Primo Range: 0 to 1999 ppm (mg/L), Primo 2 Range: 0 to 1999 ppm (mg/L) and 0.0 to 60.0°C, Primo 5 Range: 0 to 1999 µS/cm
|Range||0 to 1999 ppm (mg/L); 0.0 to 60.0°C|
|Resolution||1 ppm (mg/L); 0.1°C|
|Accuracy||±2% F.S.; ±0.5°C|
|Calibration Solution||HI 70032P|
|Calibration||automatic, at 1382 ppm|
|Temperature Compensation||Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C|
|Battery Type / Life||2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use|
|Environment||0 to 50°C (32 to 122°F); RH max 95%|
|Dimensions||180 x 50 x 25 mm (7.1 x 2.0 x 1.0″)|
|Weight||50 g (1.8 oz.)|