อุปกรณ์วัด Conductivity/TDS (Pronto TDS Meter 1 ppm (mg/L) resolution)
Pronto TDS Meter
1 ppm (mg/L) resolution
- Water resistant
- Continuous TDS monitoring
- Visual LED alarms
This water resistant TDS meter is the result of customer requests for accurate, affordable process monitoring with low maintenance.
HI 983309-01 is supplied with a direct 2-pin probe and 2 m (6.6′) cable with a ½” thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C (41 to 122°F) with a β of 2% per degree.
In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval. A front trimmer allows manual calibration at 1 point. The electrical circuitry is tightly sealed inside the water resistant enclosure. This meter can be installed anywhere quickly and easily with the casings molded eye. The casing has been specially designed to sit out of the way and will not roll off a table. The 12 VDC power supply allows continuous monitoring over extended periods of time.
HI 983309-01 (115V) and HI 983309-02 (230V) are supplied with HI 7634/2 EC/TDS probe, calibration screwdriver, 12 VDC adapter and instructions.
|Range||0 to 999 ppm (mg/L)|
|Resolution||1 ppm (mg/L)|
|Accuracy @ 20°C||±2% F. S.|
|Calibration||manual, one point, through trimmer|
|automatic, 5 to 50°C (41 to 122°F) with ß=2%|
|Set Point||0 to 150 ppm (mg/L)|
|Alarm||red LED blinks when measured value goes over the set point|
|Probe (included)||HI 7634/2|
|Power Supply||12 VDC adapter (included)|
|Environment||0 to 50°C (32 to 122°F); RH max 100%|
|Dimensions||86 x 110 x 43 mm (3.4 x 4.3 x 1.7’’)|
|Weight||215 g (7.6 oz.)|
Requesting a Quotation and Ordering Products
131 Thailand Science Park. Innovation Cluster 1 Building,
Klong 1, Klong Luang, Pathumthani 12120 Thailand.
Tel. 02-191-3928 Fax 02-191-3929
For more information please contact 081-847-6768 (Ms. Nareerat) IDLine: @alltestkit
E-mail : firstname.lastname@example.org