อุปกรณ์วัด Conductivity/TDS (Conductivity analog laboratory)
HI 2314-02 Conductivity analog laboratory
HI 2314 is a benchtop conductivity meter multiscale, combining ease of use, accuracy and convenience. And ‘ideal for any application laboratory, especially for teaching. The 4 scales covering every possible application, from deionized water to brine.
All measurements in each scale are performed with a single 4-ring potentiometric probe with platinum. This type of probe technologically advanced it is easier to clean and resistant to corrosion and temperature compared to a conventional amperometric probes.
Temperature compensation is performed manually using the knob on the front panel.
Range EC 0.0 to 199.9 mS / cm, 0 to 1999 mS / cm 0.00 to 19.99 mS / cm, 0.0 to 199.9 mS / cm
Resolution EC 0.1 mS / cm, 1 mS / cm, 0.01 mS / cm, 0.1 mS / cm
Accuracy EC (at 20 ° C) ± 1% FS (excluding probe error)
Calibration manual, 1 point
Conductivity probe HI 76300 4-ring platinum, 1 m cable (included)
Temperature Compensation manual from 0 to 50 ° C with ß = 2% / ° C
Supply 12 Vdc (power supply included)
Dimensions and weight 235 x 222 x 109 mm / 1.3 kg