Main Menu
สถิติเยี่ยมชม
  • หน้าแรก>>Products>>Dissolved Oxygen Meter>>Dissolved Oxygen Bench Meter>>อุปกรณ์วัด ออกซิเจนละลาย (Research Grade Dissolved Oxygen and BOD Meter)
  • header_20130328140754.jpg

    อุปกรณ์วัด ออกซิเจนละลาย (COD Research Grade Dissolved Oxygen and BOD Meter)

      HI 4421

    Research Grade Dissolved Oxygen and BOD Meter

    HI 4421 is a research grade dissolved oxygen bench meter with extensive capabilities in measuring DO as BOD (Biological Oxygen Demand), OUR (Oxygen Uptake Rate), SOUR (Specific Oxygen Uptake Rate), atmospheric pressure and temperature.
    DO measurements can be performed in ppm (mg/L) range or in % and feature automatic or manual temperature and atmospheric pressure compensation and manual salinity compensation.

    Automatic and manual calibration of DO can be performed in one or two points using standard or user defined standards. Users can set the reading stability criteria; three modes are available: Fast, Medium and Accurate. Direct/autohold auomatically holds the reading on display when measurement stability is reached. In direct reading mode, the user interface can be set to basic with or without GLP, graphic or logging information.

    These instruments offer multi-language support and contextual help is available through a dedicated Help key. Clear tutorial messages and directions are available on-screen to quickly and easily guide users through all measurement and calibration procedures to ensure measurements and procedures are performed properly.

    The BOD, OUR and SOUR methods are supported with a dedicated tutorial and step by step indication in order to assure a full and correct reading of DO using this specific measuring method.

    The DO probe is using the polarographic principal of measurement and has a built-in temperature sensor.

    Up to 10 profiles can be saved and recalled eliminating the need to reconfigure each time when a different electrode is used. User definable configurations can include reading mode: direct or BOD, OUR, and SOUR, measurement units, temperature units, stability criteria, and temperature, atmospheric pressure and salinity compensation.

    Three selectable logging modes are available: Automatic, Manual and AutoHold logging. Up to 100 logging lots can be stored for automatic or manual modes. Automatic logging features a selectable area and sampling period while GLP information includes complete data about user calibration of each parameter and identification information for the instrument, user, and company. Data can be transferred to a PC via the opto-isolated PC interface via the RS232 or USB ports and HI 92000 software (optional).
    Specifications
    Range Dissolved Oxygen 0.00 to 90.00 ppm; 0.0 to 600.0 % saturation
    Barometric Pressure 450 to 850 mmHg; 560 to 1133 mBar
    Temperature -20.0 to 120.0°C; -4.0 to 248°F; 253.1 to 393.1 K
    Resolution Dissolved Oxygen 0.01 ppm; 0.1% saturation
    Barometric Pressure 1 mm Hg
    Temperature 0.1°C/°F/K
    Accuracy Dissolved Oxygen ±1.5% of reading ±1 digit
    Barometric Pressure ±3 mm Hg + 1 least significant digit
    Measurement
    Modes   direct DO; BOD (biochemical oxygen demand); OUR (oxygen uptake rate); SOUR (specific oxygen uptake rate)
    Calibration Dissolved Oxygen automatic/user standard, one or two points
    Barometric Pressure single point
    Temperature
    Compensation   0.0 to 50.0°C; 32.0 to 122.0°F; 237.1 to 323.1 K
    Salinity
    Compensation   0 to 45 g/L (ppt)
    Probe   thin body, polarographic dissolved oxygen probe with internal temperature sensor and 1 m (3.3’) cable (included)
    Logging Record Samples up to 100 lots; 10,000 samples/lot for automatic logging; 5000 samples/lot for manual logging
    Logging Interval from one second and up
    Type manual, automatic
    GLP Features   yes (last calibration data, calibration info)
    Alarm (DO, BOD, OUR, SOUR)   inside and outside limits
    PC Connection   opto-isolated USB and RS232
    Display   graphic color LCD with on-screen help, graphing, language selection and custom configuration
    Power Supply   12 VDC adapter (included)
    Dimensions   160 x 231 x 94 mm (6.3 x 9.1 x 3.7”)
    Weight   1.2 Kg (2.6 lbs.)

    Accessories
    Solutions
    HI 7040L Zero Oxygen Solution
    HI 7041S Refilling Electrolyte Solution, 30 mL
    HI 7041M Refilling Electrolyte Solution, 230 mL
    HI 7041M Refilling Electrolyte Solution, 230 mL
    HI 7041L Refilling Electrolyte Solution, 500 mL
    Accessories
    HI 76407A/P Membranes for DO Probes
    HI 76404N Electrode Holder for HI 42xx Type Bench Meters
    HI 92000 Windows® Compatible Software
    HI 920013 USB Cable
    HI 920010 Cable for PC Connection, 9 to 9-pin
    Probes
    HI 76408 Thinner Lighter DO Probe for Laboratories
    HI 76407/2 Standard DO Probe, 2 m cable
    HI 76407/4 Standard DO Probe, 4 m cable
    HI 76407/10 Standard DO Probe, 10 m cable
    HI 76407/20 Standard DO Probe, 20 m cable

    ไฟล์ที่เกี่ยวข้องกับผลิตภัณฑ์
  • Requesting a Quotation and Ordering Products

    131 Thailand Science Park. Innovation Cluster 1 Building,

    Klong 1, Klong Luang, Pathumthani 12120 Thailand. 

    Tel.  02-191-3928 Fax 02-191-3929


    For more information please contact 081-847-6768 (Ms. Nareerat) IDLine: @alltestkit

    E-mail : info@highents.com

     

    >>Online Quotation Click here<<