Dissolved Oxygen Laboratory Bench Meter
HI 2400 is a dissolved oxygen benchtop meter with automatic calibration and % or mg/L (ppm) measurement range. The measurement is automatically compensated for altitude and salinity compensation based on the user settings for altitude up to 4000 m and 40 g/L for salinity.
Calibration is performed at one or two points at 0% using HANNA’s HI 7040 solution or 100% in air.
Measurements are automatically temperature compensated by using the polarographic DO probe with built-in temperature sensor. This probe features screw cap membranes for easy replacement.
With a built-in logging function, measurements are stored in non volatile memory, and can be transferred to a PC through the USB port using the optional HI 92000 software and HI 920013 USB cable. The software is provided with an exclusive online guide of all the commands available and allows data printing, plotting and exporting.
The 8000 record logging interval allows the possibility of process and experimental monitoring of DO. The logging interval is automatic with user selectable intervals from 5 seconds to 180 minutes according with the speed of DO variation inside the process.
The HI 2400 also provides users with GLP (Good Laboratory Practice) capabilities. GLP is a set of functions that allow the storage and retrieval of data regarding calibration. The GLP feature provides data consistency and a calibration reminder which can be set to alert the user that too much time has elapsed since the last calibration and a new one should be performed.
HI 2400-01 (115V) and HI 2400-02 (230V) are supplied with HI 76407/2 dissolved oxygen probe, HI 76407A membrane caps (2), HI 7041S electrolyte solution (30 mL), 12 VDC adapter and instructions.
Range DO 0.00 to 45.00 mg/L
% Saturation O2 0.0 to 300.0%
Temperature 0.0 to 50.0°C
Resolution DO 0.01 mg/L
% Saturation O2 0.1%
Accuracy (@20°C) DO ±1.5% F.S.
% Saturation O2 ±1.5% F.S.
Temperature ±0.2°C (excluding probe error)
DO Calibration one or two points at 0% (HI 7040 solution) and 100% (in air)
Compensation 0 to 4000 m (resolution 100 m)
Compensation 0 to 40 g/L (resolution 1 g/L)
Compensation automatic, 0.0 to 50.0°C (32.0 to 122ºF)
Probe HI 76407/2 polarographic DO probe with internal temperature sensor, DIN connector and 2 m (6.6’) cable (included)
Logging Interval 5, 10, 30 seconds or 1, 2, 5, 10, 15, 30, 60, 120, 180 minutes
PC Connection opto-isolated USB
Power Supply 12 VDC adapter
Environment 0 to 50°C (32 to 122°F); RH max 95%
Dimensions 235 x 222 x 109 mm (9.2 x 8.7 x 4.3”)
Weight 1.3 kg (2.9 lbs.)
HI 7040L Zero Oxygen Solution
HI 7041S Refilling Electrolyte Solution, 30 mL
HI 7041M Refilling Electrolyte Solution, 230 mL
HI 7041L Refilling Electrolyte Solution, 500 mL
HI 76407A/P Membranes for DO Probes
HI 92000 Windows® Compatible Software
HI 920010 Cable for PC Connection, 9 to 9-pin
HI 76407/2 Standard DO Probe, 2 m cable
HI 76407/4 Standard DO Probe, 4 m cable
HI 76407/10 Standard DO Probe, 10 m cable
HI 76407/20 Standard DO Probe, 20 m cable
HI 76408 Thinner Lighter DO Probe for Laboratories